Certified Professionals

Tim Maas is active as EMC/ ESD expert for more than 20 years. He currently owns Total ESD solutions, a Dutch based electrostatics consultancy company, which provides training, testing services, instrument calibration and expertise on ESD safe product design and working ESD safe.

Tim has worked for Océ Technologies BV (now known as Canon Production Printing) and ASML Netherlands BV as EMC/ ESD expert. Tim is a member of the Dutch standardization committee affiliated with IEC TC101 Electrostatics and a member of the ESDA since 2018.

Tim graduated in 1997 with a BSc in electrical engineering.

Credential ID: https://esdcertification.esda.org/en/c/29a7deed1cbc4466b25e81f7b27ff818

Tim Peterson is the Manufacturing Group Leader for Cameron Health, Inc.  He is responsible for the operations on the manufacturing line while producing subcutaneous implantable defibrillators.  Prior to this role, Tim was a Senior Industrial Engineer, also at Cameron Health, where he was responsible for facility and clean room construction, validation, and maintenance, process improvements and manufacturing engineering support, as well as updating the company ESD procedures and processes.  Tim has a Bachelor of Science Degree in Industrial Engineering from California Polytechnic State University, San Luis Obispo.

Outside of work, Tim enjoys spending time with his wife and two kids, camping, and flying

Tim has been the Engineering Supervisor for NRD Advanced Static Control (NRD, LLC) since 2011.  Along with engineering duties, he is also the Quality Manager, Facilities Supervisor, and IT Supervisor.  He is a veteran of the United States Navy Submarine Force, and holds a BSEE degree from the University of Vermont. Tim has been an ESDA member since 2014.

Outside of work, Tim is father to 3 kids, and enjoys hunting, fishing, camping, scroll saw woodworking, and golf.

Credential ID: https://esdcertification.esda.org/en/c/883db06f554e4a8da4a51fab8b2f8e07

Timothy Prass is a Senior Quality Engineer with Raytheon Technical Services Co., LLC. There he is a divisional AS9100 Lead Internal Auditor, Site and Divisional ESD Lead.  He is the acting Administrative Lead of the Raytheon Corporate ESD Council, which is currently implementing a corporate-wide ESD policy and specification.

Timothy has 25 years experience in design and manufacturing of electromechanical products with Trane Air Conditioning Co., United Technologies - Carrier, and Raytheon.

He earned his B.S.M.E. from Michigan State University, and MBA from Butler University.

Timothy is the working group chair of WG13, Hand Tools; secretary of WG 53, Compliance Verification; a statistics lead for the design and conduct of interlaboratory testing; and a member of the Standards Committee.

Todd Mills, PMP is a Principal Engineer at Honeywell FM&T in Kansas City, MO.

Todd has an MS Degree in Engineering Management from the University of Kansas and BS Degree in Electrical Engineering from the University of North Dakota. He is a retired Naval Officer with a number of years at sea as part of both the surface and submarine communities.

Credential ID: https://esdcertification.esda.org/en/c/ff61bcce9a1f4e8399f84e886f2b0f90

Crdential ID: https://esdcertification.esda.org/c/33413380a5594d95b3a91a16c1ae81cc